Alexander Wang Inspired Bra Top DIY

Rihanna image source ...T by Alexander Wang bra top





* Old wife beater or tank top
* Elastic {I used 1-1/2" wide}
* Scissors, pins, needle, thread






* With the bra you're going to be wearing with it, try on your tank & decide how short/long you want it. You'll want to stitch the bottom 1-1/4" of the tank to the elastic so lay your elastic over it and mark it.




* Lay tank flat and cut {I had to cut twice ;)}




* Pin the end of the elastic to the side seam of your tank & try it on again. Measure elastic around the edge of the tank. Cut the elastic about 1" to 1-1/2" SHORTER than measurement so it will fit like elastic is supposed to {but not too tight}





* Remove and pin the rest of the elastic to your tank







* Using a wide & loose criss-cross stitch, hand-stitch elastic to tank. {If you've got a serger/overlock machine, obviously this would be your preferred method} Remember you are working with stretch materials and you're going to have to stretch it to get it on. This is why you keep stitches loose or they will snap! {you may also choose to use elastic thread}




* Make sure your stitches on the elastic side are very small so they are near invisible.




* Finish the elastic off by stitching the end & side together.
















I originally chose the pink tank because I thought it would stand out best for this tutorial but I kind of love how it turned out. I actually had a few of these tops in the 90's by Calvin Klein and wore them under my school uniform oxford button downs. I wish I still had them ;)

Have Fun!

---

Tweet